DREDGER(TSHD) ''ARCO ARUN'' / BLT'87 / SALE IN UK


Bronco Shipbrokers Pvt Ltd
  • Name : ARCO ARUN
  • Category : Dredgers
Description
Kindly note that we can develop the sale of the following Trailing Suction Hopper Dredger located in UK:

TSHD “ARCO ARUN”
Principal Dimensions and Characteristics
 
Year Built:
1987
 
Classification
BV (Bureau Veritas)
 
Length Overall:
98.30 m
322.51 feet
 
Length Between Perpendiculars:
92.72 m
304.2 feet
 
Beam Overall:
17.37 m
57 feet
 
Draft:
6.284 m
20.6 feet
 
Draft at Dredgemark:
6.901 m
22.64 feet
 
Dead Weight (dredge mark):
6,288.3 tonnes
 
GRT/NRT
3,476 / 1,042
 
Speed (aver gage):
8.6 knots
 
Speed (maximum):
16.5 knots
 
Hopper Volume:
2,743 cubic meters
96,868.13 cubic feet
 
Gas Oil Bunker Capacity:
283.47 cubic meters
10,010.65 cubic feet
Engines
 
Main Engine
 
 
Make/Model:
Mirrlees Blackstone Diesel / KMR6MK3
 
 
Power @ RPM:
3,226 kW
4,326 hp
 
Auxiliary Engines (2)
 
 
Make/Model
Mirrlees Blackstone Diesel / ESL 8 MK 2
 
 
Power:
1,321 kW
1,771.5 hp
 
 
Capacity:
1,525 kVA
 
 
Voltage:
660 Volt AC
 
 
Make/Model
Caterpillar Diesel / 3408 B
 
 
Power:
309 kW
414.4 hp
 
 
Capacity:
390 kVA
 
 
Voltage:
400 Volt AC (harbor set)
 
Emergency Generator Set (1)
Propulsion
 
Controllable Pitch Propeller Gearbox (at the aft side)
 
 
Make:
Lohmann & Stolterfoht Gearbox
 
 
Capacity:
2,250 kVA
 
 
Voltage:
660 Volt AC
Discharge System
 
Drag Scraper Buckets (2)
 
 
Capacity:
8 cubic meters each
10.5 cubic yards each
 
 
Includes a discharge conveyor belt at the port and stb. aft side of the vessel.
Trailing Pipe
 
 
Diameter:
700 mm
27.6 inches
 
 
Length:
50 mm
1.96 inches
 
 
With a submersible dredge pump, elbow and cardan point, and equipped with a California draghead.
Dredge Pump
 
Make:
IHC Submersible type (standard single walled pump housing)
 
Motor (1)
 
 
Make:
Indar Electric
 
 
Power:
1,100 kW
1,475.12 hp
Bow Thruster
 
Type:
Transverse (Electrically Driven)
 
 
Power:
294 kW
394.3 hp
Emergency Dump System
 
Dump Valves (6) in the Hopperwell Bottom
 
 
Diameter:
750 mm
30 inches
 

The ship is in Warm Layup with machinery all being run every three weeks with most of the class in order.
The Chief Engineer remains on board and is prepared to assist you if you consider buying the vessel.
  
Awaits your firm interest.

All details are given in good faith without Guarantee.
Please quote our Ref No while contacting us reg the Vessels / Rigs available for sale.